Tailoring through Colloidal Processing - Research

The group follows an interdisciplinary way of research mainly focused on the processes to develop complex microstructures and the surface characterization of solid particles in liquid media. Biomedical, energetic or structural applications can be faced by an addequate selection of the materials to be processed to with specific biological, chemical, magnetic, catalithic or mechanical properties. While trying to look for a logical way to collect and present the publications, it has been realized (again) that most of the proposed lines overlap the papers. For that reason they have been listed cronologycally.

 

2024

A. Ferrández-Montero, P. Ortega-Columbrans, A. Eguiluz, A. J. Sanchez-Herencia, R. Detsch, A. R. Boccaccini, B. Ferrari, "Biocompatible colloidal feedstock for material extrusion processing of bioceramic-based scaffolds", Polym. Compos., online (2024). DOI:10.1002/pc.28263

O. Urra, J. Artigas-Arnaudas, A.J. Sanchez-Herencia, B. Ferrari, A. Ureña, M. Sanchez, "Cathodic electrophoretic deposition (EPD) of two-dimensional colloidal Ni(OH)2 and NiO nanosheets on carbon fibers (CF) for binder-free structural solid-state hybrid supercapacitors", J. Energy Storage, 81, 110373, (2024). DOI:/10.1016/j.est.2023.110373

M.F. Hernandez, P.V. Lopez, B. Ferrari, N.M. Rendtorff, A.J. Sanchez-Herencia, "Colloidal processing, sintering and properties of aluminum borate Al18B4O33 porous ceramics",Ceram. Int, 50 (1), 1615-22 (2024). DOI:10.1016/j.ceramint.2023.10.255

P. Ortega-Columbrans, A. Ferrandez-Montero, J. Yus, A.J. Sanchez-Herencia and B. Ferrari, "Processing of membranes and 3D scaffolds based on n-TiO2 colloidally dispersed on a thermoplastic matrix for photocatalytic pollutant removal", Catal. Today, 426, 114371 (2024). DOI:10.1016/j.cattod.2023.114371

2023

E. Usala; E. Espinosa; W. El Arfaoui; R. Morcillo-Martín; B. Ferrari; Z. González, "Antibacterial Aerogels-Based Membranes by Customized Colloidal Functionalization of TEMPO-Oxidized Cellulose Nanofibers Incorporating CuO", Bioengineering, 10(11), 1312 (2023). DOI:10.3390/bioengineering10111312

R. Mineiro, C.M. Fernandes, E.L. Silva, M.R. Soares, D. Figueiredo, B. Ferrari, A.J. Sanchez-Herencia, A.M.R. Senos, "Reaction behavior during Spark Plasma Sintering of cBN-TiCN-Ni powders", J. Eur. Ceram. Soc., 43 (15) 6783-6792 (2023). DOI: 10.1016/j.jeurceramsoc.2023.06.074

A.-A. Zegai, H. Besharatloo, P. Ortega, B. Djerdjare, B. Ferrari, A.J. Sanchez-Herencia, "Microstructural and Mechanical Characterization of Colloidal Processed WC/(W5Vol%Ni) via Spark Plasma Sintering", Materials, 16, 4584 (2023).DOI: 10.3390/ma16134584

O. Urra, H. Besharatloo, J. Yus, A.J. Sanchez-Herencia, B. Ferrari, "Material thermal extrusion of conductive 3D electrodes using highly loaded graphene and graphite colloidal feedstock", Add. Manuf., 72, 1036437 (2023).DOI: 10.1016/j.addma.2023.103643

H. Besharatloo, M. de Nicolas-Morillas, M. Chen, A. Mateo, B. Ferrari, E. Gordo, E. Jimenez-Pique, J.M. Wheeler f, L. Llanes, "Micropillar compression of Ti(C,N)-FeNi cermets: Microstructural, processing, and scale effects", J. Eur. Ceram. Soc., 43 (7), 2826 - 2833 (2023).DOI: 10.1016/j.jeurceramsoc.2022.09.029

S. Mouhtadi, O. Urra, C.C. Buron, C. Filiâtre, B. Ferrari, I. Pochard, "Nanoarchitectonics of eco-friendly nickel oxide nanoplatelets for energy storage", App. Phys. A, 129 (1), 6 (2023) DOI: 10.1007/s00339-022-06278-2

2022

M. Mariani, G. Frias Blanco, E. Mercadelli, A.J. Sanchez-Herencia, C. Galassi, N. Lecis, B. Ferrari B., "Tailoring α-alumina powder morphology through spray drying for cold consolidation by binder jetting", Open Ceram., 12, 100307 (2022)DOI: 10.1016/j.oceram.2022.100307


C. Argentati, F. Dominici, F. Morena, M. Rallini, I. Tortorella, A. Ferrandez-Montero, R.M. Pellegrino, B. Ferrari, C. Emiliani, M. Lieblich, L. Torre. S. Martino, I. Armentano, "Thermal treatment of magnesium particles in polylactic acid polymer films elicits the expression of osteogenic differentiation markers and lipidome profile remodeling in human adipose stem cells", Int. J. Biol. Macromol., 223, 684 - 701 (2022) DOI: 10.1016/j.ijbiomac.2022.11.005


P.J. Lloreda-Jurado, K. Balu, J. Hernandez-Saz, E. Chicardi, B. Ferrari, R. Sepulveda, "Alumina doped Fe2O3 foams by freeze-casting for redox cycling applications", J. Eur. Ceram. Soc., 42, 5922–5931 (2022) DOI: 10.1016/j.jeurceramsoc.2022.06.054


J. Orellana-Barrasa,A. Ferrandez-Montero, B. Ferrari and J.Y. Pastor, "Natural Ageing of PLA Filaments, Can It Be Frozen?", Polymers, 14 (16) 3361 (2022) DOI: 10.3390/polym14163361


S. Retegi-Carrión, A. Ferrandez-Montero, A. Eguiluz, B. Ferrari, A. Abarrategi, "The Effect of Ca2+ and Mg2+ Ions Loaded at Degradable PLA Membranes on the Proliferation and Osteoinduction of MSCs", Polymers, 14 (12) 2422 (2022) DOI:10.3390/polym14122422

J. Yus, J.A. Escribano, A.J. Sanchez-Herencia, C. Galassi and B. Ferrari "Direct Inkjet Printing of Digitally Designed 2D TiN Patterns", Coatings, 12 (6), 729 (2022)DOI:10.3390/coatings12060729

S.B. Abdollahi Boraei, J. Nourmohammadi, F.S. Mahdavi, Y. Zare, K.Y. Rhee, A. Ferrandez-Montero, A.J. Sanchez-Herencia and B. Ferrari "Osteogenesis capability of three-dimensionally printed poly(lactic acid)-halloysite nanotube scaffolds containing strontium ranelate", Nanotech. Rev. 11 (1), 1901 - 1910 (2022) DOI:10.1515/ntrev-2022-0113

2021

J. Yus, Z. Gonzalez, A.J. Sanchez-Herencia, A. Sangiorgi, A. Sanson, C. Galassi and B. Ferrari, "High photocatalytic efficiency of inkjet printed patterns by formulation of eco-friendly TiO2-based inks", Open Ceramics 8, 100197 (2021)DOI: 10.1016/j.oceram.2021.100197


A. J. Sanchez-Herencia, Z. Gonzalez, A. Rodriguez, E. Molero and B. Ferrari, "Operational Variables on the Processing of Porous Titanium Bodies by Gelation of Slurries with an Expansive Porogen", Materials, 14 (16) 4744 (2021). DOI: 10.3390/ma14164744


N. Alinejadian, F. Nasirpouri, J. Yus and B. Ferrari, "Reduction-based engineering of three-dimensional morphology of Ni-rGO nanocomposite", Materials Science and Engineering: B. 271, 115259 (2021). DOI: 10.1016/j.mseb.2021.115259


J. Orellana, A. Ferrandez-Montero, B. Ferrari, J.Y. Pastor, "Characterisation and Modelling of PLA Filaments and Evolution with Time", Polymers. 13 (17) 2899 (2021). DOI: 10.3390/polym13172899.


E.M. Garcia-Ayala, S. Tarancon, B. Ferrari, J.Y. Pastor, A.J. Sanchez-Herencia, "Thermomechanical behaviour of WC-W2C composites at first wall in fusion conditions", Int. J. Refract Metal. Hard Mater., 98 105565 (2021). DOI: 10.1016/j.ijrmhm.2021.105565


A. Ferrández-Montero, A. Eguiluz, E. Vazquez, J. D. Guerrero, Z. Gonzalez, A.J. Sánchez-Herencia, B. Ferrari, "Controlled SrR Delivery by the Incorporation of Mg Particles on Biodegradable PLA-Based Composites" Polymers. 13 (7) 1061 (2021). DOI: 10.3390/polym13071061


A. Eguiluz, A. Ferrández-Montero, J. Yus, A.J. Sánchez-Herencia, B. Ferrari"Dispersion of Ni nanoparticles into Ti(C,N) colloidal filaments for 3D printing by FFF" Open Ceram. 5, 100064 (2021).DOI: 10.1016/j.oceram.2021.100064


E.M.Garcia-Ayala, L.Silvestroni, J.Yus, B.Ferrari, J.Y.Pastor and A.J.Sanchez-Herencia"Colloidal processing and sintering of WC-based ceramics with low Ni content as sintering aid", J. Eur. Ceram. Soc, 41 (3) 1848, -1858 (2021).DOI: 10.1016/j.jeurceramsoc.2020.10.038


Z. Gonzalez, J. Yus, R. Moratalla and B. Ferrari, "Electrophoretic deposition of binder-free TiN nanoparticles to design 3D microstructures. The role of sintering in the microstructural robustness of supercapacitor electrodes", Electrochim. Acta, 369, 137654 (2021).DOI: 10.1016/j.electacta.2020.137654


C. Vega Maeso, G. Gallello, S. Palmero, B. Ferrari, M.A. Sánchez Carro, M.R. González Morales, I. Gutiérrez Zugasti, M. Ramacciotti, A. Pastor, "Ceramic productions and human interactions during the Early Bronze Age in northern Iberia" Archaeometry, 63 (1) 68-87 (2021). DOI: 10.1111/arcm.12605


D. Tovar-Vargas, B. Ferrari, A. J. Sanchez-Herencia, M. Anglada, E. Jimenez-Pique, "Low Temperature Degradation and Mechanical Properties of Alumina Reinforced Ceria-Zirconia by Colloidal Processing", J. Eur. Ceram. Soc, 41 (2) 1459-1470 (2021). DOI: 10.1016/j.jeurceramsoc.2020.09.031


Z. Gonzalez, J. Yus, Y.Bravo, A.J. Sanchez-Herencia and B. Ferrari, "Exploitation of Lignocellulose Fiber-Based Biotemplates to Improve the Performance of an Immobilized TiO2 Photocatalyst" Catalysts, 11 (2), 156 (2021). DOI: /10.3390/catal11020156


S. Behnam Abdollahi, J. Nourmohammadi, B. Bakhshandeh, M. Mehdi Dehghani, H. Gholami, Z. Gonzalez, A. J. Sanchez-Herencia, B. Ferrari, "Capability of core-sheath polyvinyl alcohol- Polycaprolactone emulsion electrospun nanofibrous scaffolds in releasing strontium ranelate for bone regeneration" Biomed. Mater., online (2021). DOI: /10.1088/1748-605X/abdb07

2020

Z. Gonzalez, J. Yus, Y.Bravo, A.J. Sanchez-Herencia, A.Rodríguez, J. Dewalque, L. Manceriu, C. Henrist and B. Ferrari, "Heteroacoagulation of lignocellulose fibers-based biotemplates and functionalized TiO2 nanoparticles to tailor film microstructures", Cellulose, 27, 7543–7559 (2020).DOI:// 10.1007/s10570-020-03297-1


S. Behnam Abdollahi, J. Nourmohammadi, F. Sadat Mahdavi, J. Yus, A. Ferrandez-Montero, A. J. Sanchez-Herencia, Z. Gonzalez, B. Ferrari, "Effect of SrR delivery in the biomarkers of bone regeneration during the in vitro degradation of HNT/GN coatings prepared by EPD", Colloids Surf. B., 190, 110944 (2020) DOI://10.1016/j.colsurfb.2020.110944


A. Ferrandez-Montero, M. Lieblich, R. Benavente, J. L. González-Carrasco and B. Ferrari, "Study of the matrix-filler interface in PLA/Mg composites manufactured by Material Extrusion using a colloidal feedstock", Addit. Manuf. 33, 101142 (2020).DOI://10.1016/j.addma.2020.101142


J. Yus, B. Ferrari, A.J. Sanchez-Herencia and Z. Gonzalez, “Understanding the effects of different microstructural contributions in the electrochemical response of nickel-based semiconductor electrodes with 3D hierarchical networks shapes”  Electrochim. Acta335, 135629 (2020). DOI:10.1016/j.electacta.2020.135629


A. Ferrandez-Montero, M. Lieblich, R. Benavente, J. L. González-Carrasco and B. Ferrari, "New approach to improve polymer-Mg interface in biodegradable PLA/Mg composites through particle surface modification", Surf. Coat. Tech. 383,125285 (2020).DOI:/10.1016/j.surfcoat.2019.125285.


M.  de Nicolás, H. Besharatloo, J. M. Wheeler, M.  Dios, P. Alvaredo, J.J. Roa, B. Ferrari, L. Llanes, E. Gordo, “Influence of the processing route on the properties of  Ti(C,N)-Fe15Ni”, Int. J. Refract. Met. Hard Mater. 85, 105046 (2020). DOI: 10.1016/j.ijrmhm.2019.105046


M.Coronada Fernández-Calderón, D. Romero-Guzmán, A. Ferrández-Montero, C. Pérez-Giraldo, J.L. González-Carrasco, M. Lieblich, R. Benavente, B. Ferrari, M.L. González-Martín, A. M. Gallardo-Moreno, "Impact of PLA/Mg films degradation on surface physical properties and biofilm survival", Coll. Surf. B: Biointerfaces, 185, 110617 (2020). DOI: 10.1016/j.colsurfb.2019.110617


I. Msadok, N. Hamdi, M.A. Rodríguez, B. Ferrari, E. Srasra,, "Synthesis and characterization of Tunisian organoclay: Application as viscosifier in oil drilling fluid", Chem. Eng. Res. Des., 153, 427-434 (2020)
DOI:10.1016/j.cherd.2019.11.010

2019

H. Besharatloo, M. de Nicolás, M. Wheeler, A. Mateo, B. Ferrari, E. Gordo, L. Llanes, J.J. Roa,Carbon addition effects on microstructure and small-scale hardness for Ti(C,N)-FeNi cermets”Int. J. Refract. Met. Hard Mater. 85, 105064 (2019). DOI: 10.1016/j.ijrmhm.2019.105064


M.E. Garcia-Ayala, S. Tarancon, Z. Gonzalez, B. Ferrari, J.Y. Pastor, A.J. Sanchez-Herencia, "Processing of WC/W composites for extreme environments by colloidal dispersion of powders and SPS sintering",Int. J. Refract. Met. Hard Mater., 84,105026 ( 2019,)DOI:10.1016/j.ijrmhm.2019.105026


H. Besharatloo, M.  de Nicolás, J.J. Roa, M.  Dios, A. Mateo, B. Ferrari, E. Gordo, L. Llanes, “Assessment of mechanical properties at microstructural length scale of Ti(C,N)–FeNi ceramic-metal composites by means of massive nanoindentation and statistical analysis”, Ceram. Inter., 45 (16) 20202-20210 (2019). DOI: 10.1016/j.ceramint.2019.06.292

A. Ferrandez-Montero, M. Lieblich, J.L. Gonzalez-Carrasco, R. Benavente, V. Lorenzo, R.  Detsch, A.R.  Boccaccini, B. Ferrari, “Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications”, Acta Biomater. 98, 114-124 (2019).DOI: 10.1016/j.actbio.2019.05.026


J. Yus, Z. Gonzalez, A.J. Sanchez-Herencia, A. Sangiorgi, N. Sangiorgi, A. Sanson, C. Galassi, A. Caballero, J. Morales, B. Ferrari, “
Semiconductor water-based inks: Miniaturized NiO pseudocapacitor electrodes by inkjet printing”, J. Eur. Ceram. Soc.  39 (9)2908-2914 (2019). DOI: 10.1016/j.jeurceramsoc.2019.03.020


J. Yus, Y. Bravo, A.J. Sanchez-Herencia, B. Ferrari, Z. Gonzalez, “Electrophoretic deposition of RGO-NiO core-shell nanostructures driven by heterocoagulation method with high electrochemical performance”, Electrochim. Acta, 38, 363-372 (2019).
DOI: 10.1016/j.electacta.2019.04.053


A. Sangiorgi, Z. Gonzalez, A. Ferrandez-Montero, J. Yus, A. J. Sanchez-Herencia, C. Galassi, A. Sanson and B. Ferrari, "3D Printing of Photocatalytic Filters Using a Biopolymer to Immobilize TiO2 Nanoparticles", J. Electrochem. Soc. 166 (5), H3239-H3248 (2019).
DOI: 10.1149/2.0341905jes


P. Alvaredo, M. Dios, B. Ferrari, E. Gordo, “Understanding of wetting and solubility behavior of Fe binder on Ti(C,N) cermets”, J. Alloys Compounds, 770, 17-25 (2019).
DOI: 10.1016/j.jallcom.2018.07.243

Z. Gonzalez, J. Yus, A.J. Sanchez-Herencia, J. Dewalque, L. Manceriu, C. Henrist, B. Ferrari, “A colloidal approach to prepare binder and crack-free TiO2 multilayer coatings from particulate suspensions: Application in DSSCs”, J. Eur. Ceram. Soc. 39 (2-3), 366-375 (2019).
DOI: 10.1016/j.jeurceramsoc.2018.09.018

 

2018

T. Zimmermann, A. Ferrandez-Montero, M. Lieblich, B. Ferrari, J.L. González-Carrasco, W.D. Müller, A.D. Schwitalla, “In vitro degradation of a biodegradable polylactic acid/magnesium composite as potential bone augmentation material in the presence of titanium and PEEK dental implants”, Dent. Mater. 34 (10), 1492-1500 (2018).
DOI: 10.1016/j.dental.2018.06.009


P. Alvaredo, J. Escribano, B. Ferrari, A.J. Sánchez-Herencia and E. Gordo, “Steel binder cermets processed by combination of colloidal processing and powder metallurgy”, Int. J. Refract. Met. Hard Mater. 74, 1-6 (2018). DOI: 10.1016/j.ijrmhm.2018.02.018


M.Dios, I. Kraleva, Z. Gonzalez, P.Alvaredo, B.Ferrari, E.Gordo and R.Bermejo, “Mechanical Characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes”, J. Alloys Compd., 732 806-87(2018).DOI: 10.1016/j.jallcom.2017.10.274


C.Mendoza, Z.Gonzalez, E.Gordo, B.Ferrari and Y.Castro, “Protective nature of nano-TiN coatings shaped by EPD on Ti substrates”, J. Eur. Ceram. Soc., 38 (2) 495-500 (2018).DOI: 10.1016/j.jeurceramsoc.2017.09.046


J. Yus, E. Chinarro, B. Ferrari and Z. Gonzalez, "The Effect of the Substrate on the Conductivity of NiO Electrodes in Electrochemical Capacitor Shaped by Electrophoretic Deposition", ECS Trans. 82 (1) 97-104 (2018)DOI: 10.1149/08201.0097ecst

2017

J. Yus, B. Ferrari, A.J. Sanchez-Herencia, A. Caballero, J. Morales and Z. Gonzalez, “In Situ Synthesis and Electrophoretic Deposition of NiO/Ni Core-Shell Nanoparticles and Its Application as Pseudocapacitor”,Coatings, 7, (11) 193 (2017).DOI: 10.3390/coatings7110193


E. Espinosa, R. Sanchez, Z. Gonzalez, J. Dominguez-Robles, B. Ferrari, A. Rodriguez, “Rapidly growing vegetables as new sources for lignocellulose nanofibre isolation: Physicochemical, thermal and rheological characterisation”, Carbohydrate Polym., 175, 27-37 (2017).DOI: 10.1016/j.carbpol.2017.07.055


Z. Gonzalez, J.Yus, A.Caballero, J. Morales, A.J. Sanchez-Herencia and B. Ferrari, “Electrochemical performance of pseudo-capacitor electrodes fabricated by Electrophoretic Deposition inducing Ni(OH)2 nanoplatelets agglomeration by Layer-by-Layer”, Electrochim. Acta, 247, 333-343 (2017).DOI: 10.1016/j.electacta.2017.07.043


M.Dios, Z. Gonzalez, P.Alvaredo, R.Bermejo, E. Gordo and B. Ferrari, “Novel colloidal approach for the microstructural improvement in Ti(C,N)/FeNi cermets”, J. Alloys Compd., 724 327-338(2017).DOI: 10.1016/j.jallcom.2017.07.034


Z. Gonzalez, C. Filiatre, C.C. Buron, A J. Sanchez-Herencia and B. Ferrari, “Electrophoretic Deposition of Ni(OH)2 Nanoplatelets Modified by Polyelectrolyte Multilayers: Study of the Coatings Formation in a Laminar Flow Cell”, J. Electrochem. Soc., 164 (7) D436-D444 (2017). DOI: 10.1149/2.0801707jes


N.I. Vazquez, Z. Gonzalez, B. Ferrari, Y. Castro, “Synthesis of mesoporous silica nanoparticles by sol-gel as nanocontainer for future drug delivery applications”, B. Soc. Esp. Ceram. Vidr., 56, (3) 139-145 (2017).DOI: 10.1016/j.bsecv.2017.03.002


M. Dios, Z. González, E. Gordo, B. Ferrari, “Chemical precipitation of nickel nanoparticles on Ti(C,N) suspensions focused on cermet processing”, Int. J. Refract. Met. Hard Mater., 63, 2-8 (2017).
DOI: 10.1016/j.ijrmhm.2016.08.009


E. Molero, B. Ferrari, A.J. Sanchez-Herencia, E. Gordo, P. Colombo, “ Ti/Ti3SiC2(/TiC) bulk and foam composites by pyrolysis of polycarbosilane and TiH2 mixtures”, Adv. Eng. Mater., 1600700. doi:10.1002/adem.201600700 (2017).DOI: 10.1002/adem.201600700


J. Ureña, C. Mendoza, B. Ferrari, Y. Castro, S. Tsipas, A. Jiménez-Morales, E. Gordo, “Surface Modification of Powder Metallurgy Titanium by Colloidal Techniques and Diffusion Processes for Biomedical Applications”, Adv. Eng. Mater., In press (2017).DOI: 10.1002/adem.201600207


B. Velasco, E. Molero, B. Ferrari, S.A. Tsipas, E. Gordo, “Study and optimization of Ti3SiC2 MAX phase foams processed by colloidal methods”. EUROPM2017 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2017). ISBN: 978-1-899072-49-1.

H. Besharatloo, J.J Roa, M. Dios, A. Mateo B.Ferrari, E.Gordo, L. Llanes, “Micromechanics of Ti(C,N)-FeNi composites: Statistical analysis and flow stress determination for the FeNiC binder” ”. EUROPM2017 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2017). ISBN: 978-1-899072-49-1.

M. Dios, Z. Gonzalez, B. Ferrari, I. Kraleva, R. Bermejo, P. Alvaredo, E. Gordo, “Influence of the colloidal processing route on the mechanical properties of Ti(C,N)-based cermets”. Proceedings of the 19th Plansee Seminar.

2016

M. Dios, Z. González, E. Gordo, B. Ferrari, “Semiconductor-metal core-shell nanostructures by colloidal heterocoagulation in aqueous medium”, Mater. Lett., 180, 627-631 (2016).DOI: 10.1016/j.matlet.2016.05.179

Z. Gonzalez, B. Ferrari, A.J. Sanchez-Herencia, A. Caballero, J. Morales, “Use of Polyelectrolytes for the Fabrication of Porous NiO Films by Electrophoretic Deposition for Supercapacitor Electrodes”, Electrochimica Acta, 211, 110-118 (2016).DOI: 10.1016/j.electacta.2016.06.014

A. Alemán, I.  Mastrogiacomo, M.E. López-Caballero, B. Ferrari, M.P. Montero, M.C Gómez-Guillén, “A Novel Functional Wrapping Design by Complexation of ε-Polylysine with Liposomes Entrapping Bioactive Peptides “, Food Bioprocess Tech., 9 (7) 1113-1124 (2016). DOI: 10.1007/s11947-016-1703-4

C. Mendoza, Z. Gonzalez, Y. Castro, E. Gordo, B. Ferrari, “Improvement of TiN nanoparticles EPD inducing steric stabilization in non-aqueous suspensions”, J. Eur. Ceram. Soc., 32 (2) 307-317 (2016).DOI: 10.1016/j.jeurceramsoc.2015.06.023

F. Frajkorova, E. Molero, P. Montero, M. C. Gomez-Guillen, A.J. Sanchez-Herencia, B. Ferrari, “Biodegradable bi-layered coatings shaped by dipping of Ti films followed by the EPD of gelatin/hydroxyapatite composites” J. Eur. Ceram. Soc., 32 (2) 343-355 (2016).DOI: 10.1016/j.jeurceramsoc.2015.07.005

J. Eur. Ceram. Soc. Electrophoretic Deposition of Ceramics: Fundamentals and Applications, Ed. by A.R. Boccaccini, B. Ferrari, J.H. Dickerson and C. Galassi, Editorial: Elsevier, (2015). Volume 36, issue 2 (2016)Link to Issue:

E. Gordo, R.G. das Neves, B. Ferrari, A. Jimenez-Morales, A. Lima, A.C. Alves, A. M. Pinto, F. Toptan, “Corrosion and tribocorrosion behavior of Ti-alumina composites”, 3rd Conference on Powder Processing Consolidation and Metallurgy of Titanium, ISBN: 978-303835539-7, Key Eng. Mater., 708, 28-37 (2016). DOI: 10.4028/www.scientific.net/KEM.704.28

B. Ferrari, E. Molero, A.J. Sanchez-Herencia, R. Das Neves, E. Gordo, “Shaping strategies for porous Ti fabrication throughout colloidal chemistry”, Key Eng. Mater., 3rd Conference on Powder Processing Consolidation and Metallurgy of Titanium, ISBN: 978-303835539-7, Key Eng. Mater., 708, 406-412 (2016). DOI: 10.4028/www.scientific.net/KEM.704.406

M. Dios, Z. Gonzalez, C. Romero, E. Gordo, B. Ferrari, “Ti(C,N)-Fe/Ni/FeNi core-shell structures for cermets processing”, World PM 2016 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2016). ISBN: 978-1-899072-48-4S.

J. Ureña, F. Toptan, B. Ferrari, S. Tsipas, A. Jimenez-Morales, E. Gordo, “Design and evaluation of PM Ti surfaces modified by colloidal techniques and diffusion processes for biomedical applications” , World PM 2016 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2016). ISBN: 978-1-899072-48-4S.

2015

Z. González, A.J. Sánchez-Herencia, B. Ferrari, A. Caballero, J. Morales, “Relevance of the Semiconductor Microstructure in the Pseudocapacitance of the Electrodes fabricated by EPD of Binder-free β-Ni(OH)2 Nanoplatelets”, J. Electrochem. Soc., 162 (11) D3001-D3012 (2015).DOI: 10.1149/2.0101511jes

S. Cabanas-Polo, Z. Gonzalez, A.J. Sanchez-Herencia, B. Ferrari, “Influence of ultrasound in the instantaneous synthesis of tridimensional α-Ni(OH)2 nanostructures and derived NiO nanoparticles”, Cryst. Eng. Comm., 17 (32) 6193-6206 (2015). DOI: 10.1039/c5ce00876j

B. Velasco, S. A. Tsipas, B. Ferrari, E. Gordo, “MAX phase foams produced via powder metallurgy process using water soluble space holder”, Powder Tech., 58 (2) 95-99 (2015).DOI: 10.1179/0032589915Z.000000000226

S. Cabanas-Polo, Z. Gonzalez, A.J. Sanchez-Herencia, B. Ferrari, A. Caballero, L. Hernan and J. Morales, “Cyclability of binder-free β-Ni(OH)2 anodes shaped by EPD for Li-ion batteries”, J. Eur. Ceram. Soc., 35 (2) 573-584 (2015).DOI: 10.1016/j.jeurceramsoc.2014.08.014

J. A. Escribano, J. L García, P. Alvaredo, B. Ferrari, E. Gordo, A. J. Sanchez-Herencia, ”FGM Stainless Steel-Ti(CN) Cermets Through Colloidal Processing”, Int. J. Refract. Metals Hard Mater., 49 (1) 143-152 (2015).DOI: 10.1016/j.ijrmhm.2014.05.008

J. Valle, M. Anglada, B. Ferrari, C. Baudín, “Processing, nanoindentation and scratch testing of alumina-coated YTZ”, B. Soc. Esp. Ceram. Vidr., 54 (4) 133-141 (2015).DOI: 10.1016/j.bsecv.2015.07.002

F. Frajkorova, E. Molero, B. Ferrari, “Electrophoretic deposition of gelatin/hydroxyapatite composite coatings onto a stainless steel substrate”, Key. Eng.  Mater., 654, 195-199 (2015).DOI: 10.4028/www.scientific.net/KEM.654.195

C. Mendoza, Z. González, Y. Castro, B. Ferrari, “Dispersion and stabilization of TiN and TiC nanoparticles in organic suspensions”, Key Eng. Mater., 654, 203-207 (2015).DOI: 10.4028/www.scientific.net/KEM.654.203

Z. Gonzalez, A.J. Sanchez-Herencia, B. Ferrari; A. Caballero, J. Morales, “Nickel oxide/nickel foam composite as supercapacitor Electrode via electrophoretic deposition”, Key Eng. Mater., 654, 58-64 (2015).DOI: 10.4028/www.scientific.net/KEM.654.58

Key Engineering Materials: Electrophoretic Deposition: Fundamentals and Applications V, Ed. by A.C. Boccaccini, J.H. Dickerson, B. Ferrari, O. Van der Biest, T. Uchikoshi, Editorial: Trans. Tech Publications, (2015). ISBN-13: 978-3-03835-497-0

E. Molero, A. J. Sanchez-Herencia, B. Ferrari, E. Gordo and P. Colombo, “Optimization of Ti suspensions for the reinforcement of Ti scaffolds via direct foaming of a polycarbosilane”, Actas del XI Congreso Nacional de Materiales Compuestos, Ed by A. Ureña, J. Tortosa and J. Costa, Editorial: AEMC and URJC, Madrid, pp. 577-582 (2015). ISBN-978-84-697-0406-6

J. A. Escribano, E. Gordo, A. Javier Sánchez-Herencia and B. Ferrari, “Aplicación de las técnicas coloidales al procesamiento de cermets Acero/Ti(C,N) en agua”, Actas del XI Congreso Nacional de Materiales Compuestos, Ed by A. Ureña, J. Tortosa and J. Costa, Editorial: AEMC and URJC, Madrid, pp. 553-558 (2015). ISBN-978-84-697-0406-6

J. Ureña, C. Mendoza, B. Ferrari, Y. Castro, S. Tsipas, A.J. Morales, E. Gordo, “Modificación superficial de titanio pulvimetalúrgico mediante recubrimientos aplicados por técnicas coloidales y diffusion”, Actas del  XIV Congreso Nacional de Tratamientos Térmicos y de Superficie, Ed. by P. Blanco y L. Alarcón, Editorial: AIMEN, O Porriño, pp. 53-58 (2015). ISBN: 978-84-608-2190-8

M. Dios, Z. Gonzalez, E. Gordo, B. Ferrari, “Core-shell Ti(C,N)-Ni structures fabricated by chemical precipitation of Ni-based nanoparticles on Ti(C,N) suspensions”, Euro PM2015 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2015). ISBN: 978-1-899072-47-7

P. Alvaredo, M. de Dios, B. Ferrari, E. Gordo, “Interface study for the design of alternative matrixes in cermets”, Euro PM2015 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2015). ISBN: 978-1-899072-47-7

R. G. Neves, E. Tabares, B. Ferrari, A.J. Sanchez-Herencia, A. Garcia-Casas, A. Jiménez-Morales, E. Gordo, “Corrosion behavior of Ti and Ti reinforced by addition of ceramic particles obtained by combination of Colloidal and Powder metallurgy techniques”, Euro PM2015 Proceedings USB, Ed. by EPMA, Editorial: EPMA, Suiza (2015). ISBN: 978-1-899072-47-7

2014-

Y. Castro, E. Molero, P. Parente, A. Duran, A. J. Sanchez-Herencia and B. Ferrari, "Electric field driven assembly of hybrid micelles for shaping of porous silica films", Adv. Appl. Ceram., 113 (1) 10955-10967 (2014) Link to D.O.I

R.G. Neves, B. Ferrari, A.J. Sanchez-Herencia, C. Pagnoux and E. Gordo, “Role of stabilisers in the design of ti aqueous suspensions for pressure slip casting”, Powder Technol., 263, 81-88 (2014)Link to D.O.I

I. Gonzalo-Juan, J.A. Escribano, Y. Castro, A.J. Sanchez-Herencia, J.L.G. Fierro and B. Ferrari “One-pot manufacture of nanoparticle-based films in aqueous media via an electric field-driven assembly process”, Green Chem., 16 (6), 3286-96 (2014)Link to D.O.I

J.A. Escribano, B. Ferrari, P. Alvaredo, E. Gordo and A.J. Sanchez-Herencia, “Colloidal processing of Fe-based metalceramic composites with high content of ceramic reinforcement”, Bol. Soc. Esp. Ceram. V., 52 (6), 247-50 (2013) Link to D.O.I

R.G. Neves, B. Ferrari, A.J. Sanchez-Herencia, and E. Gordo, "Improvement of sintering behaviour of titanium by colloidal techniques", Powder Metall. 56 (4) 258-262 (2013).Link to D.O.I

A. Caballero, L. Hernán, J. Morales, S. Cabanas-Polo, B. Ferrari, A.J. Sanchez-Herencia and J. Canales-Vázquez, "Electrochemical properties of ultrasonically prepared Ni(OH)2 nanosheets in lithium cells", J. Power Sources, 238, 366-371 (2013). Link to D.O.I

R.G. Neves, B. Ferrari, A.J. Sanchez-Herencia and E. Gordo, "Colloidal approach for the design of Ti powders sinterable at low temperature" Mater. Lett., 107, 75-78 (2013). Link to D.O.I

A. Caballero, L. Hernán, J. Morales, Z. González, A. J. Sánchez-Herencia and B. Ferrari, "A High-Capacity Anode for Lithium Batteries Consisting of Mesoporous NiO Nanoplatelets", Energy Fuels, 27 (9) 5545-5551 (2013)
Link to D.O.I

M. Verde, M. Peiteado, M. Villegas, B. Ferrari and A.C. Caballero, "Soft solution processing of ZnO nanoarrays by combining electrophoretic deposition and hydrothermal growth", Mater. Chem. Phys., 140, (1) 75-80 (2013).Link to D.O.I

P. Parente, B. Savoini, B. Ferrari, R. Pareja, M.A. Monge, A.J. Sánchez-Herencia, “Effect of highly dispersed yttria addition on thermal stability of hydroxyapatite” Mater. Sci. Eng. C., 33 (2) 864-869 (2013). Link to D.O.I

P. Parente, M. Mesa, A. J. Sánchez-Herencia, B. Ferrari, “Functionalizing Ti-Surfaces through the EPD of HA/NanoY2O3J. Phys. Chem. B, 117 (6) 1600–1607 (2013). Link to D.O.I

J.A. Escribano, I. Gonzalo-Juan, A.J. Sanchez-Herencia and B. Ferrari, "AFM Characterization of the Nanoparticles Arrangement by Electrophoretic Deposition", Key Eng. Mater., 507, 61-66 (2012).Link to D.O.I

R. G. Neves, J.A.Escribano, B. Ferrari, E. Gordo and A.J. Sanchez-Herencia, "Improvement of Ti Processing through Colloidal Techniques" Key Eng. Mater., 520, 335-340 (2012).Link to D.O.I

P. Parente, Y. Ortega, B. Savoini, M.A. Monge, A. Tucci, L. Esposito, B. Ferrari, A. J. Sanchez-Herencia, “Characterization of residual compressive stresses in layered ceramics by positron annihilation spectroscopy”, J. Eur. Ceram. Soc., 32 [16] 3989-3993 (2012). Link to D.O.I

M. Verde, M. Peiteado, A. C. Caballero, M. Villegas and B. Ferrari, "Electrophoretic deposition of transparent ZnO thin films from highly stabilized colloidal suspensions", J. Colloid Interface Sci. 373 [1] 27–33 (2012). Link to D.O.I

S. Cabanas-Polo, R. Bermejo, B. Ferrari, A. J. Sanchez-Herencia, “Ni-NiO composites obtained by controlled oxidation of green compacts”, Corros. Sci., 54 [2] 172-179 (2012). Link to D.O.I

I. Gonzalo-Juan, B. Ferrari, M.T. Colomer, M.A. Rodriguez, A.J. Sanchez-Herencia, P-Y. Koh, A.S. Teja, “Synthesis and dispersion of yttria-stabilized zirconia (YSZ) nanoparticles in supercritical water,. Mater. Chem. Phys., 134, (1), 451–458, (2012). Link to D.O.I

I. Gonzalo-Juan, P. Parente, A. J. Sanchez-Herencia, F. Rubio, R. Pareja and B. Ferrari, "Positron annihilation study of defect distribution in 8YSZ nanostructure", Solid State Ionics, 190 (1) 67-74 (2011). Link to D.O.I

L. Dusoulier, R. Cloots, B. Vertruyen, R. Moreno, O. Burgos-Montes and B. Ferrari, "YBa2Cu3O7-x dispersion in iodine acetone for electrophoretic deposition: Surface charging mechanism in a halogenated organic media", J. Eur. Ceram. Soc., 31 (6) 1075-1086 (2011). Link to D.O.I

S. Cabanas-Polo, K. S. Suslick and A. J. Sanchez-Herencia, "Effect of reaction conditions on size and morphology of ultrasonically prepared Ni(OH)(2) powders", Ultrason. Sonochem., 18 (4) 901-906 (2011). Link to D.O.I

M. Verde, A. C. Caballero, Y. Iglesias, M. Villegas and B. Ferrari, "Electrophoretic Deposition of Flake-Shaped ZnO Nanoparticles", J. Electrochem. Soc., 157 (1) H55-H59 (2010). Link to D.O.I

P. Parente, Y. Ortega, B. Savoini, M. A. Monge, A. Tucci, L. Esposito and A. J. Sanchez-Herencia, "Microstructural characterization of alumina-zirconia layered ceramics using positron annihilation spectroscopy", Acta Mater., 58 (8) 3014-3021 (2010). Link to D.O.I

I. Gonzalo-Juan, B. Ferrari, M. T. Colomer and A. J. Sanchez-Herencia, "Colloidal processing and sintering of porous percolative Ni-YSZ layers", J. Mem. Sci., 352 (1-2) 55-62 (2010). Link to D.O.I

B. Ferrari and R. Moreno, "EPD kinetics: A review", J. Eur. Ceram. Soc., 30 (5) 1069-1078 (2010). Link to D.O.I

S. Bueno, B. Ferrari, C. Melandri, G. de Portu and C. Baudin, "Processing of alumina-coated tetragonal zirconia materials and their response to sliding wear", Ceram. Int., 36 (5) 1545-1552 (2010). Link to D.O.I

A. J. Sanchez-Herencia and C. Baudin, "Ceramic laminates with tailored residual stresses", Bol. Soc. Esp. Ceram. Vid., 48 (6) 311-320 (2009).

M. Mora, V. Lennikov, H. Amaveda, L. A. Angurel, G. F. de la Fuente, M. T. Bona, C. Mayoral, J. M. Andres and J. Sanchez-Herencia, "Fabrication of Superconducting Coatings on Structural Ceramic Tiles", IEE Trans. App Supercond., 19 (3) 3041-3044 (2009). Link to D.O.I

I. Gonzalo-Juan, B. Ferrari and M. T. Colomer, "Influence of the urea content on the YSZ hydrothermal synthesis under dilute conditions and its role as dispersant agent in the post-reaction medium", J. Eur. Ceram. Soc., 29 (15) 3185-3195 (2009).Link to D.O.I

B. Ferrari, A. Bartret and C. Baudin, "Sandwich materials formed by thick alumina tapes and thin-layered alumina-aluminium titanate structures shaped by EPD", J. Eur. Ceram. Soc., 29 (6) 1083-1092 (2009). Link to D.O.I

B. Ferrari, S. Bueno and C. Baudin, "Consolidation of flaw-tolerant layered structures by the insertion of reactive layers", Bol. Soc. Esp. Ceram. Vidr., 48 (5) 261-266 (2009).

L. Dusoulier, R. Cloots, B. Vertruyen, J. L. Garcia-Fierro, R. Moreno and B. Ferrari, "Interactions in YBa2Cu3O7-x aqueous suspensions", Mater. Chem. Phys., 116 (2-3) 368-375 (2009).Link to D.O.I
Link to
C. Baudin, J. Gurauskis, A. J. Sanchez-Herencia and V. M. Orera, "Indentation Damage and Residual Stress Field in Alumina-Y2O3-Stabilized Zirconia Composites", J. Am. Ceram. Soc., 92 (1) 152-160 (2009). Link to D.O.I

J. Ruiz-Hervias, G. Bruno, J. Gurauskis, A. J. Sanchez-Herencia and C. Baudin, "Residual stresses in AI2O3/Y-TZP ceramic laminates fabricated by tape and slip casting", in Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, Ed., vol. 571-572Edition, (2008).

I. Nicolaidis, J. Gurauskis, C. Baudin, R. Moreno and A. J. Sanchez-Herencia, "Forming of ceramic laminates comprising thin layers of a few particles", J. Am. Ceram. Soc., 91 (7) 2124-2129 (2008). Link to D.O.I

M. Mora, R. Moreno and A. J. Sanchez-Herencia, "Nickel Sheets from Suspensions of the Metallic Powders in Water", Adv. Eng. Mater., 10 (10) 982-985 (2008). Link to D.O.I

A. J. Sanchez-Herencia, " Water based colloidal processing of ceramic laminates", in Layered, Functional Gradient Ceramics, and Thermal Barrier Coatings: Design, Fabrication and Applications, Ed., vol. 333Edition, (2007).

J. Gurauskis, A. J. Sanchez-Herencia and C. Baudin, "Alumina-zirconia layered ceramics fabricated by stacking water processed green ceramic tapes", J. Eur. Ceram. Soc., 27 (2-3) 1389-1394 (2007). Link to D.O.I

J. Gurauskis, C. Baudin and A. J. Sanchez-Herencia, "Tape casting of Y-TZP with low binder content", Ceram. Int., 33 (6) 1099-1103 (2007). Link to D.O.I

P. Garcia, B. Ferrari, R. Moreno, A. J. Sanchez-Herencia and M. T. Colomer, "YSZ/Ni-YSZ semi-cells shaped by electrophoretic deposition", J. Eur. Ceram. Soc., 27 (13-15) 4241-4244 (2007). Link to D.O.I

B. Ferrari, R. Moreno, L. Hernan, M. Melero, J. Morales and A. Caballero, "EPD of thick films for their application in lithium batteries", J. Eur. Ceram. Soc., 27 (13-15) 3823-3827 (2007). Link to D.O.I

R. Bermejo, Y. Torres, C. Baudin, A. J. Sanchez-Herencia, J. Pascual, M. Anglada and L. Llanes, "Threshold strength evaluation on an Al2O3-ZrO2 multilayered system", J. Eur. Ceram. Soc., 27 (2-3) 1443-1448 (2007). Link to D.O.I

R. Bermejo, C. Baudin, R. Moreno, L. Llanes and A. J. Sanchez-Herencia, "Processing optimisation and fracture behaviour of layered ceramic composites with highly compressive layers", Comp. Sci. Tech., 67 (9) 1930-1938 (2007). Link to D.O.I

R. Bermejo, A. J. Sanchez-Herencia, L. Llanes and C. Baudin, "High-temperature mechanical behaviour of flaw tolerant alumina-zirconia multilayered ceramics", Acta Mater., 55 (14) 4891-4901 (2007). Link to D.O.I

A. J. Sanchez-Herencia, N. Hernandez and R. Moreno, "Rheological behavior and slip casting of Al2O3-Ni aqueous suspensions", J. Am. Ceram. Soc., 89 (6) 1890-1896 (2006). Link to D.O.I

A. J. Sanchez-Herencia, J. Gurauskis and C. Baudin, "Processing of Al2O3/Y-TZP laminates from water-based cast tapes", Composites B., 37 (6) 499-508 (2006). Link to D.O.I

J. Ruiz-Hervias, G. Bruno, J. Gurauskis, A. J. Sanchez-Herencia and C. Baudin, "Neutron diffraction investigation for possible anisotropy within monolithic Al2O3/Y-TZP composites fabricated by stacking together cast tapes", Scripta Mater., 54 (6) 1133-1137 (2006). Link to D.O.I

J. Gurauskis, A. J. Sanchez-Herencia and C. Baudin, "Al2O3/Y-TZP and Y-TZP materials fabricated by stacking layers obtained by aqueous tape casting", J. Eur. Ceram. Soc., 26 (8) 1489-1496 (2006). Link to D.O.I

B. Ferrari, S. Gonzalez, R. Moreno and C. Baudin, "Multilayer coatings with improved reliability produced by aqueous electrophoretic deposition", J. Eur. Ceram. Soc., 26 (1-2) 27-36 (2006). Link to D.O.I

B. Ferrari, A. J. Sanchez-Herencia and R. Moreno, "Nickel-alumina graded coatings obtained by dipping and EPD on nickel substrates", J. Eur. Ceram. Soc., 26 (12) 2205-2212 (2006). Link to D.O.I

B. Ferrari, R. Moreno and J. A. Cuesta, " A resistivity model for electrophoretic deposition", in Electrophoretic Deposition: Fundamentals and Applications Ii, Ed., vol. 314Edition, TRANS TECH PUBLICATIONS LTD,  Zurich-Uetikon, (2006).

B. Ferrari, I. Santacruz, I. M. de Francisco, M. I. Nieto and R. Moreno, " Thermogelation of composite films produced by electrophoretic codeposition", in Electrophoretic Deposition: Fundamentals and Applications Ii, Ed., vol. 314Edition, TRANS TECH PUBLICATIONS LTD,  Zurich-Uetikon, (2006).

G. P. De, J. Gurauskis, L. Micele, A. J. Sanchez-Herencia, C. Baudin and G. Pezzotti, "Piezo-spectroscopic characterization of alumina-zirconia layered composites", J. Mater. Sci., 41 (12) 3781-3785 (2006). Link to D.O.I

A. Caballero, L. Hernan, M. Melero, J. Morales, R. Moreno and B. Ferrari, "LiNi0.5Mn1.5O4 thick-film electrodes prepared by electrophoretic deposition for use in high voltage lithium-ion batteries", J. Power Sources, 158 (1) 583-590 (2006). Link to D.O.I

R. Bermejo, Y. Torres, A. J. Sanchez-Herencia, C. Baudin, M. Anglada and L. Llanes, "Fracture behaviour of an Al2O3-ZrO2 multi-layered ceramic with residual stresses due to phase transformations", Fatigue Fract. Eng. Mater. Struct, 29 (1) 71-78 (2006). Link to D.O.I

R. Bermejo, Y. Torres, A. J. Sanchez-Herencia, C. Baudin, M. Anglada and L. Llanes, "Residual stresses, strength and toughness of laminates with different layer thickness ratios", Acta Mater., 54 (18) 4745-4757 (2006). Link to D.O.I

R. Bermejo, A. J. Sanchez-Herencia, C. Baudin and L. Llanes, "Residual stresses in Al2O3-ZrO2 multilayered ceramics: nature, evaluation and influence on the structural integrity", Bol. Soc. Esp. Ceram. Vid., 45 (5) 352-357 (2006).

A. J. Sanchez-Herencia, N. Hernandez and R. Moreno, " Fracture behaviour of pressureless sintered nickel-reinforced alumina composites", in Fractography of Advanced Ceramics Ii, Ed., vol. 290Edition, (2005).

M. G. Pontin, F. F. Lange, A. J. Sanchez-Herencia and R. Moreno, "Effect of unfired tape porosity on surface film formation by dip coating", J. Am. Ceram. Soc., 88 (10) 2945-2948 (2005).

N. Hernandez, A. J. Sanchez-Herencia and R. Moreno, "Forming of nickel compacts by a colloidal filtration route", Acta Mater., 53 (4) 919-925 (2005).

N. Hernandez, R. Moreno, A. J. Sanchez-Herencia and J. L. G. Fierro, "Surface behavior of nickel powders in aqueous suspensions", J. Phys. Chem. B, 109 (10) 4470-4474 (2005).

J. Gurauskis, J. Pascual, T. Lube, A. J. Sanchez-Herencia and C. Baudin, " Fracture of monoliths fabricated by stacking water processed green ceramic tapes", in Fractography of Advanced Ceramics Ii, Ed., vol. 290Edition, (2005).

S. Gonzalez, B. Ferrari, R. Moreno and C. Baudin, "Strength analysis of self-supported films produced by aqueous electrophoretic deposition", J. Am. Ceram. Soc., 88 (9) 2645-2648 (2005).

J. Gurauskis, A. J. Sanchez-Herencia and C. Baudin, "Joining green ceramic tapes made from water-based slurries by applying low pressures at ambient temperature", J. Eur. Ceram. Soc., 25 (15) 3403-3411 (2005).

B. Ferrari, I. M. de Francisco and R. Moreno, "Ni-YSZ self-supported films by gel electrophoresis", Ceram. Int., 31 (6) 863-868 (2005).

Y. Castro, B. Ferrari, R. Moreno and A. Duran, "Corrosion behaviour of silica hybrid coatings produced from basic catalysed particulate sols by dipping and EPD", Surf. Coat. Technol., 191 (2-3) 228-235 (2005).

Y. Castro, B. Ferrari, R. Moreno and A. Duran, "Silica-zirconia coatings produced by dipping and EPD from colloidal sol-gel suspensions", J. Sol-Gel Sci. Technol., 35 (1) 51-55 (2005).

I. Santacruz, B. Ferrari, M. I. Nieto and R. Moreno, "Graded ceramic coatings produced by thermogelation of polysaccharides", Mater. Lett., 58 (21) 2579-2582 (2004).

R. I. Merino, J. I. Pena, V. M. Orera, A. Larrea and Y. A. J. Sanchez-Herencia, "Laser-assisted surface melting of Al2O3-YSZ eutectic ceramics", Bol. Soc. Esp. Ceram. Vid., 43 (5) 855-862 (2004).

B. Ferrari, J. L. Rodriguez, E. Rojas and R. Moreno, "Colloidal forming of coatings in the inner walls of a steel pipe", Bol. Soc. Esp. Ceram. Vidr., 43 (2) 501-505 (2004).

B. Ferrari, I. Santacruz, M. I. Nieto and R. Moreno, "Thermogelation of Al2O3/Y-TZP films produced by electrophoretic co-deposition", J. Eur. Ceram. Soc., 24 (10-11) 3073-3080 (2004).

B. Ferrari, I. Santacruz, M. I. Nieto and R. Moreno, " Forming of ceramic coatings by dipping and EPD through carrageenan gelation", in Euro Ceramics Viii, Pts 1-3, Ed., vol. 264-268Edition, TRANS TECH PUBLICATIONS LTD,  Zurich-Uetikon, (2004).

B. Ferrari and R. Moreno, "Ni-YSZ graded coatings produced by dipping", Adv. Eng. Mater., 6 (12) 969-971 (2004).

Y. Castro, B. Ferrari, A. Duran and R. Moreno, "Effect of rheology and processing parameters on the EPD coatings of basic sol-gel particulate sol", J. Mater. Sci., 39 (3) 845-849 (2004).

Y. Castro, B. Ferrari, R. Moreno and A. Duran, "Coatings produced by electrophoretic deposition from nano-particulate silica sol-gel suspensions", Surf. Coat. Technol., 182 (2-3) 199-203 (2004).

I. Santacruz, B. Ferrari, M. I. Nieto and R. Moreno, "Ceramic films produced by a gel-dipping process", Adv. Eng. Mater., 5 (9) 647-650 (2003).

Y. Castro, B. Ferrari, R. Moreno and A. Duran, "Silica sol-gel coatings on metals produced by EPD", J. Sol-Gel Sci. Technol., 26 (1-3) 735-739 (2003).

A. J. Sanchez-Herencia, C. A. Gutierrez, A. J. Millan, M. I. Nieto and R. Moreno, " Colloidal forming of metal/ceramic composites", in Euro Ceramics Vii, Pt 1-3, Ed., vol. 206-2Edition, (2002).

M. G. Pontin, M. P. Rao, A. J. Sanchez-Herencia and F. F. Lange, "Laminar ceramics utilizing the zirconia tetragonal-to-monoclinic phase transformation to obtain a threshold strength", J. Am. Ceram. Soc., 85 (12) 3041-3048 (2002).

R. Moreno and B. Ferrari, " Aqueous electrophoretic deposition of ceramics: The controlling parameters", in Electrophoretic Deposition: Fundamentals and Applications, Proceedings, Ed., vol. 2002Edition, ELECTROCHEMICAL SOCIETY INC,  Pennington, (2002).

A. J. Millan, I. Santacruz, A. J. Sanchez-Herencia, M. I. Nieto and R. Moreno, "Gel-extrusion: A new continuous forming technique", Adv. Eng. Mater., 4 (12) 913-915 (2002).

M. Lugovy, N. Orlovskaya, V. Slyunyayev, G. Gogotsi, J. Kubler and A. J. Sanchez-Herencia, "Crack bifurcation features in laminar specimens with fixed total thickness", Comp. Sci. Tech., 62 (6) 819-830 (2002).

B. Ferrari, A. J. Sanchez-Herencia and R. Moreno, "Porous nickel coatings on steel tubes formed by aqueous colloidal processing", Adv. Eng. Mater., 4 (9) 690-694 (2002).

Y. Castro, B. Ferrari, R. Moreno and A. Duran, "Electrophoretic deposition (EPD) coatings of sol-gel solutions and suspensions", J. Sol-Gel Sci. Technol., 23 (2) 187-189 (2002).

Y. Castro, A. Duran, R. Moreno and B. Ferrari, "Thick sol-gel coatings produced by electrophoretic deposition", Adv. Mater., 14 (7) 505-+ (2002).

Y. Castro, B. Ferrari, A. Duran and R. Moreno, " Effect of processing parameters in the EPD kinetics of particulate sols produced by basic catalysis", in Electrophoretic Deposition: Fundamentals and Applications, Proceedings, Ed., vol. 2002Edition, ELECTROCHEMICAL SOCIETY INC,  Pennington, (2002).

A. J. Sanchez-Herencia, A. J. Millan, M. I. Nieto and R. Moreno, "Aqueous colloidal processing of nickel powder", Acta Mater., 49 (4) 645-651 (2001).

A. J. Sanchez-Herencia, R. Moreno and C. Baudin, "Microstructure-mechanical behaviour relationship in alumina-calcium exaluminate composites", Rev. Metall. Mad., 37 (2) 155-160 (2001).

B. Ferrari, J. C. Farinas and R. Moreno, "Determination and control of metallic impurities in alumina deposits obtained by aqueous electrophoretic deposition", J. Am. Ceram. Soc., 84 (4) 733-739 (2001).

A. J. Sanchez-Herencia, L. James and F. F. Lange, "Bifurcation in alumina plates produced by a phase transformation in central, alumina/zirconia thin layers", J. Eur. Ceram. Soc., 20 (9) 1297-1300 (2000).

A. J. Sanchez-Herencia, R. Moreno and J. R. Jurado, "Electrical transport properties in zirconia/alumina functionally graded materials", J. Eur. Ceram. Soc., 20 (10) 1611-1620 (2000).

A. J. Sanchez-Herencia, A. J. Millan, M. I. Nieto and R. Moreno, "Gel-forming of nickel powders from aqueous slurries", Adv. Mater., 12 (16) 1192-1195 (2000).

A. J. Sanchez-Herencia, R. Moreno and C. Baudin, "Fracture behaviour of alumina-calcium hexaluminate composites obtained by colloidal processing", J. Eur. Ceram. Soc., 20 (14-15) 2575-2583 (2000).
R. Moreno and B. Ferrari, "Advanced ceramics via EPD of aqueous slurries", Am. Ceram. Soc. Bull., 79 (1) 44-48 (2000).

R. Moreno and B. Ferrari, "Effect of the slurry properties on the homogeneity of alumina deposits obtained by aqueous electrophoretic deposition", Mater. Res. Bull., 35 (6) 887-897 (2000).

C. Gutierrez, A. J. Sanchez-Herencia and R. Moreno, "Plastic or pseudoplastic? Methods for determining and analysing the yield stress of ceramic slips", Bol. Soc. Esp. Ceram. Soc., 39 (1) 105-117 (2000).

B. Ferrari, R. Moreno, P. Sarkar and P. S. Nicholson, "Electrophoretic deposition of MgO from organic suspensions", J. Eur. Ceram. Soc., 20 (2) 99-106 (2000).

B. Ferrari, R. Moreno and Y. F. F. Lange, "Colloidal behavior of a dehydrated kaolin", Bol. Soc. Esp. Ceram. Vidr., 39 (2) 229-235 (2000).

B. Ferrari and R. Moreno, "Zirconia thick films deposited on nickel by aqueous electrophoretic deposition", J. Electrochem. Soc., 147 (8) 2987-2992 (2000).

Y. Castro, B. Ferrari, R. Moreno and A. Duran, "Sol-gel coatings obtained from electrophoretic depositions (EPD) on metals", Bol. Soc. Esp. Ceram. Vidr., 39 (6) 705-710 (2000).
D. Tudela, A. J. Sanchez-Herencia, M. Diaz, R. Fernandez-Ruiz, N. Menendez and J. D. Tornero, "Mossbauer spectra of tin(IV) iodide complexes", J. Chem Soc. Dalton (22) 4019-4023 (1999).

A. J. Sanchez-Herencia, C. Pascual, J. He and F. F. Lange, "ZrO2/ZrO2 layered composites for crack bifurcation", J. Am. Ceram. Soc., 82 (6) 1512-1518 (1999).

M. P. Rao, A. J. Sanchez-Herencia, G. E. Beltz, R. M. McMeeking and F. F. Lange, "Laminar ceramics that exhibit a threshold strength", Science, 286 (5437) 102-105 (1999).

A. J. Sanchez-Herencia and F. F. Lange, " Design of layered ZrO2/Y-TZP materials for crack bifurcation", in Ceramic Processing Science, Ed., vol. 83Edition, (1998).

A. J. Sanchez-Herencia and R. Moreno, " Design and microstructure control of ceramic laminates by colloidal filtration", in Ceramic Processing Science, Ed., vol. 83Edition, (1998).

J. S. Moya, J. A. Sanchez-Herencia and J. F. Bartolome, " Elastic modulus in rigid Al2O3/ZrO2 ceramic laminates", in Advanced Multilayered and Fibre-Reinforced Composites, Ed., vol. 43Edition, (1998).

B. Ferrari, A. J. Sanchez-Herencia and R. Moreno, "Electrophoretic forming of Al2O3/Y-TZP layered ceramics from aqueous suspensions", Mater. Res. Bull., 33 (3) 487-499 (1998).

B. Ferrari, A. J. Sanchez-Herencia and R. Moreno, "Aqueous electrophoretic deposition of Al2O3/ZrO2 layered ceramics", Mater. Lett., 35 (5-6) 370-374 (1998).

B. Ferrari and R. Moreno, "Electrophoretic forming of ceramics in aqueous media", Bol. Soc. Esp. Ceram. Vidr., 37 (5) 369-381 (1998).

B. Ferrari and R. Moreno, " Zirconia coatings onto nickel electrodes by aqueous electrophoretic deposition", in Ceramic Processing Science, Ed., vol. 83Edition, AMER CERAMIC SOC,  Westerville, (1998).

L. Esposito, R. Moreno, A. J. S. Herencia and A. Tucci, "Sliding wear response of an alumina-zirconia system", J. Eur. Ceram. Soc., 18 (1) 15-22 (1998).

A. J. Sanchez-Herencia, K. Morinaga and J. S. Moya, "Al2O3/Y-TZP continuous functionally graded ceramics by filtration-sedimentation", J. Eur. Ceram. Soc., 17 (13) 1551-1554 (1997).

A. J. Sanchez-Herencia, J. S. Moya and A. P. Tomsia, "Microstructural design in alumina-alumina/zirconia layered composites", Scripta Mater., 38 (1) 1-5 (1997).

J. S. Moya, J. A. SanchezHerencia, J. F. Bartolome and T. Tanimoto, "Elastic modulus in rigid Al2O3/ZrO2 ceramic laminates", Scripta Mater., 37 (7) 1095-1103 (1997).

M. Jimenez-Melendo, C. Clauss, A. Dominguez-Rodriguez, A. J. Sanchez-Herencia and J. S. Moya, "Microstructure and high-temperature mechanical behavior of alumina/alumina-yttria-stabilized tetragonal zirconia multilayer composites", J. Am. Ceram. Soc., 80 (8) 2126-2130 (1997).

B. Ferrari and R. Moreno, "Electrophoretic deposition of aqueous alumina slips", J. Eur. Ceram. Soc., 17 (4) 549-556 (1997).

B. Ferrari and R. Moreno, "The conductivity of aqueous Al2O3 slips for electrophoretic deposition", Mater. Lett., 28 (4-6) 353-355 (1996).

D. Tudela, J. D. Tornero, A. Monge and A. J. Sanchezherencia, "1st Crystallographically Authenticated Example of Cis-Trans Isomerism in Octahedral Tin(Iv) Halide-Complexes", Inorg. Chem., 32 (18) 3928-3930 (1993).

M. Belmonte, A. J. Sanchezherencia, R. Moreno, P. Miranzo, J. S. Moya and A. P. Tomsia, "In-Situ Formation of Ca(6) Platelets in Al2o3 and Al2o3/Zro2 Matrices", J. Phys. IV, 3 (C7) 1443-1447 (1993).

J. S. Moya, A. J. Sanchezherencia, J. Requena and R. Moreno, "Functionally Gradient Ceramics by Sequential Slip Casting", Mater. Lett., 14 (5-6) 333-335 (1992).